The lighter weight 4Bank ballast has the same classic features: individual light control, HO/Standard switching and the same high quality standards: flicker-free, instant-on, dead quiet operation. Color temperature doesn’t shift when light levels change. With its new and classic features, the popular 4Bank remains to be a favorite tool among lighting professionals in the studio or on location.

One of the design features that makes the fixture so popular is the twist-on removable Center Mount. When it's on, the fixture mounts easily to a light stand; when it's off, the fixture is flat and can be hand-held, or hidden in a space too small to place a stand-mounting fixture. When the mount is removed, the grommet holes along the edge of the fixture are designed to allow the fixture to be screwed to a wall or ceiling through its eyelets. 

Features:

• 4-Lamp remote fixture w/ built-in barndoors
• Fixture includes removable Lamp Harness, Reflector and Louver
• Same fixture takes daylight and tungsten lamps, plus visual effects color lamps
• Mounts to stand, light enough to be hand-held or taped to a wall
• Removable centre mount
• High output, flicker-free ballasts
• Universal input voltage from 100-240VAC can be used anywhere in the world
• Instant-on, dead quiet
• Individual lamp switching – no colour shift
• HO/Std switching
• Low amperage draw at 1.4A/230VAC
• Same ballast runs 4ft and 2ft lamps
• Auto terminate for 4Bank DMX ballast
• Operates at 1/3 the power of conventional tungsten soft lights
• High colour rendering (CRI 95) True Match® lamps in 2900K, 3200K and 5500K
• Visual effects lamps available in 420nm blue, 550nm green for blue & green screen application
• CE approved

Delivered with:

• (1) CFX-484 4ft Fixture
• (1) MTP-KF41 Kino 41K Mount w/ 3/8" Pin (10mm)
• (1) X16-25 Extension, 25ft
• (1) BAL-427-230U 4Bank Ballast, Univ 230U

Specs:

4’ 4 Bank Fixture: 132 x 33 x 9cm 5.2kg
Ballast: 33 x 24 x 7.6cm, 2.2kg
Power: 1.4A/240VAC (PFC)
Input: 100-240VAC 
Cable: 25’ – 7.5m

• 

  Matthews Hollywood Beefy Baby Triple Riser with Rocky Mountain Leg Stand (MD-387031)

  The Hollywood Beefy Baby is a popular stand that offers the duty of a heavier stand by combining steel and Ali.. The legs are made of steel instead of aluminum to provide greater stability and longer wear. The top riser which is the smallest in diameter is also made of steel increasing its strength and permitting the 5/8" Baby Pin to be welded directly to the riser instead of being pinned.

  Matthews Studio Equipment is the original “Hollywood” grip supplier to the film and video industries they are well known for innovation, durability and build quality

  Price: £276.00

  • Shipped direct from supplier
• 

  Matthews Kit Stand- Light/Heavy Triple Riser Black (MD-B387490)

  For a lightweight Kit stand this larger version provides a little extra support, height and stability compared to the average – built to Matthews high standards an excellent addition if you need a little extra!
  Designed primarily for use in lighting kits, these stands are compact and light weight, ideal for assembling custom lighting kits or replacing your current stands. Matthews Revenger Stands employ a 'brake shoe' system for locking off the riser tubes as opposed to 'pinch castings', therefore permitting the use of heavier fixtures. 
  Matthews Studio Equipment is the original “Hollywood” grip supplier to the film and video industries they are well known for innovation, durability and build quality  

  Price: £162.00

  • Shipped direct from supplier
• 

  Matthews Digital Baby Stand (MD-387032)

  Matthews Digital presents this high-quality lighting stand for the demanding professional. Innovative, robust and durable, the Matthews Digital lighting stands are becoming an integral component of location and studio lighting packages. Additionally, each riser section is spring-dampened, ensuring the stand may be safely lowered. Designed to be stronger and lighter than other manufacturers' more expensive aluminum stands, this is a very robust chrome steel product at a great price.

  Matthews Studio Equipment is the original “Hollywood” grip supplier to the film and video industries they are well known for innovation, durability and build quality.

  Price: £237.60

  • Shipped direct from supplier
• 

  Matthews Mini MAX Light Stand (B377701)

  Mini MAX is the smaller compact version of our very successful and very popular MAX. Like its larger counterpart, MINI MAX allows you to hang a fixture in places where no other lighting support system may go - either into a corner or flush to the wall - as there are neither rear rails nor pipes required for counterbalance. When the POV will not accommodate a stand or fixture placement, MINI MAX can 'fly' right in, making it possible to strategically place either a Key Light, Top Light or Back Light.

  Mini MAX can support a 9.1kg fixture 274cm high on a 274cm horizontal extension. MINI MAX will operate on a 105" (265cm) maximum arc from 16ft (489cm) high to 3ft (92cm) below horizontal.

  Mini MAX has a maximum operating arc of 105" (265cm) reaching a Maximum Height of 489cm to 92cm below ground level. Maximum Horizontal Extension is 274cm.

  Mini MAX features 3 Rocky Mountain Legs for non-level terrain, stairs or curbsides without the need for Apple Boxes.

  Price: £1,785.60

  • Shipped direct from supplier
• 

  Kino Flo BatWing 4Bank Louver Set (5pk) (BAT-W4)

  The BatWing® Louvers control the spread and direction of light in a Kino Flo 4Bank, Double or Single Fixture. They also solve the problem of spill light off the ends of the fixture without using blackwrap or other materials that restrict airflow and overheat the lamps.

  Price: £123.60

  • Shipped direct from supplier
• 

  Matthews Hollywood Beefy Baby Double Riser with Rocky Mountain Leg Stand (MD-387030)

  The Hollywood Beefy Baby is a popular stand that offers the duty of a heavier stand by combining steel and aliminium. The legs are made of steel instead of aluminum to provide greater stability and longer wear. The top riser which is the smallest in diameter is also made of steel increasing its strength and permitting the 5/8" Baby Pin to be welded directly to the riser instead of being pinned.

  Matthews Studio Equipment is the original “Hollywood” grip supplier to the film and video industries they are well known for innovation, durability and build quality.

  Price: £247.20

  • Shipped direct from supplier
• 

  Matthews Hollywood 40" C+Stand w/ Detachable Turtle Base, Grip Head and 40" Arm – 10.5' (3.2m) (MD-756140)

  One of the most popular models ever! This stand comes with a detachable Turtle Base, Arm and Grip Head.

  Universally seen as the best C-Stand, Grip Head and Arm in the business (due to its superior gripping strength) this product is the first choice for professionals and can be found on film sets all over the world. The T-Handles are ergonomically designed to allow for fast, efficient and safe tightening with little effort. The arm comes with a Hollywood Grip Head attached to one end and an additional Grip Head for positioning.

  Matthews are the original “Hollywood” grip suppliers to the film and video industries and are well known for innovation, durability and build quality.

  Price: £237.60

  • In Stock
• 

  Pack of 6 Kino Flo 4ft Kino 800ma KF32 Safety-Coated Lamp Bulb (488-K32-S)

  TRUE MATCH® lamp color is uniquely formulated by Kino Flo® to match the spectral sensitivity curves of film and digital imaging equipment. High output tungsten and daylight versions (CRI 95) are available in sizes that range from nine inches to eight feet, and yet the quality stays consistent within the True Match line. They are soft, energy efficient and cool to the touch. True Match lamps work side by side on the set with traditional tungsten and HMI fixtures without filtration

  Price: £303.98

  • Shipped direct from supplier
• 

  6 x Kino Flo 4ft Kino 800ma KF55 Safety-Coated Lamp Bulb (488-K55-S)

  TRUE MATCH® lamp color is uniquely formulated by Kino Flo® to match the spectral sensitivity curves of film and digital imaging equipment. High output tungsten and daylight versions (CRI 95) are available in sizes that range from nine inches to eight feet, and yet the quality stays consistent within the True Match line. They are soft, energy efficient and cool to the touch. True Match lamps work side by side on the set with traditional tungsten and HMI fixtures without filtration

  Price: £303.98

  • Shipped direct from supplier