NanLite PavoTube 15C 2 ft RGBWW LED Tube with Internal Battery 2 Light Kit
NanLite PavoTube RGBWW LED Tubes are an amazingly versatile lighting fixture that features 0 to 100% dimming with maximum illumination of 1400 lumens per tube (the 2 tubes in this kit produce 635 Lux @ 1m when combined) at 5600K, as well as a full spectrum RGBWW and pre-programmed special lighting effects. With the color temperature adjustable from 6500-2700K,a CRI of 98 and a TLCI of 95 this device exceeds most studio lighting needs. It also features a choice of over 360 static light colors on the RGB spectrum and can cycle through the entire spectrum at a speed of your choice.
- RGBWW LED Tube
- available in 2 ft and 4 ft Lengths
- Diameter: 1.9 inch, T12 Compatible
- Color Temp: 2700K-6500K
- CRI: 98
- TLCI: 95
- Dimming: 0-100%
- Power Source: DC15V 3A, AC 100-240V
- Battery: Built in Rechargeable Li-Ion
- Battery Run Time: 2.2 Hours of Runtime at 100% Brightness
- Wireless Control: 2.4ghz
- Connect Multiple Tubes Together via Sync Cord
- Pre-Programed Special Effects Including Storm, Flash, Candlelight, and Color Cycle
With six pre-programmed special effects in a simple-to-master menu system, this NanLite RGBWW light tube makes it easy to imitate lighting scenarios that can otherwise be tricky to recreate. At the touch of a button, you can simulate the lighting effects of an emergency services vehicle (cop car), flame (candlelight), lightning storm, an SOS signal, and two different types of continuous flicker/flash. Each of the special effects has many different settings to help you refine it and create precisely the effect you need, as well as an LCD panel showing you exactly what settings you're using, making it easy to fine tune and then recreate them in future.
With easy-to-use dials and buttons set into one end of the light tube, as well as built-in 2.4ghz radio control and master/slave functions, this RGB tube light is versatile enough to slot right into your existing set up without needing a lot of extra preparation. This light’s master/slave mode also makes it easy to synchronize multiple lights by chaining them together using the included sync cable to create a powerful bank of lights performing synchronized effects.
Perfect for use in the studio or on location, this lightweight tube is available in 2-foot and 4-foot lengths. Both length variants are 1.9 inches in diameter making them T12 compatible. It can be powered using the included AC adapter, and also has a built-in 2200MaH battery for use where no mains power supply is available. Supplied in a padded carrying case complete with all the accessories you need to get going, including mounting clips for adapting your light to a tripod or the wall. The light itself has octagonal ends, allowing it to be placed on the floor or a surface at a specific angle to give you maximum control over the finished effect of the lighting.
Both 2-foot and 4-foot variants are available as single lights as well as two light and four light kits
- 2x NanLite PavoTube 15C 2 ft 16w RGBWW LED Tubes
- AC Adapter
- 2x Mounting Clips
- Sync Cord
- Power Cord
- Carrying Bag