Broncolor Mini-Flamingo Stand (35.170.00)

Practical application for lowest lamp positions. The robust type of construction make possible good stability, for special lamps and reflectors

Mini MAX is the smaller compact version of our very successful and very popular MAX. Like its larger counterpart, MINI MAX allows you to hang a fixture in places where no other lighting support system may go - either into a corner or flush to the wall - as there are neither rear rails nor pipes required for counterbalance. When the POV will not accommodate a stand or fixture placement, MINI MAX can 'fly' right in, making it possible to strategically place either a Key Light, Top Light or Back Light.

Mini MAX can support a 9.1kg fixture 274cm high on a 274cm horizontal extension. MINI MAX will operate on a 105" (265cm) maximum arc from 16ft (489cm) high to 3ft (92cm) below horizontal.

Mini MAX has a maximum operating arc of 105" (265cm) reaching a Maximum Height of 489cm to 92cm below ground level. Maximum Horizontal Extension is 274cm.

Mini MAX features 3 Rocky Mountain Legs for non-level terrain, stairs or curbsides without the need for Apple Boxes.

The largest boom in Manfrotto's range, remote control of pan, tilt and rotation, plus geared telescopic extension. Combination of black zinc steel and black anodised aluminium tubes. Supplied with carrying bags. 2 sections (diameter: 45, 55mm). Folded length: 220cm. Minimum extension from stand attachment: 50cm. Max extension from stand attachment: 320cm. Suggested stand: Wind-up series.

• Reaches 3.6m, Manfrotto's biggest mega boom stand you can use
• Geared crank handles let you move smoothly
• Aluminium core means you can trust the kit is strong and durable
• Counterweight sandbag provides you with added stability
• Compatible with our wind-up stands for your exact positions

Replaces #3098

Magic Stand: This stand is truly magical!

With the Runway Base added, the Magic Stand can be a regular rolling light stand. It can be a high rolling light stand, and it can also convert to a two section light boom with its own rolling stand. Its versatility is truly magical, whether a light needs to be placed at floor height, or behind as a hair light or over a table for a product shot. This stand can do it all! Made with a standard 28mm Junior Pin at the bottom, the Magic Stand riser could be added to the Combo Stand as a very unique stand extension or inverted to hang from a C Clamp into the set. The top riser incorporates our Magic Finger. A stand that has been copied, but not yet duplicated!

Runway Base: This really low rolling stand base was designed to work with the Magic Stand, but it is also capable of handling any large light fixture mounted directly into its 28mm Posi-V-Lock Junior Receiver.

Unlike others, Matthews rolling stands track in a straight line - especially important when moving overheads or butterflies. No more foot castings. Wheel is protected when folded.

Manfrotto Steel Short Wind Up Stand (087NWSH)

Manfrotto Black Super Boom w/ stand (025BS)

• Includes lighting stands, boom, casters, and counterweight
• Supports payloads of up to 5kg
• Boom stand extends to 2.1m for versatility
• Features a wheeled-base for manoeuvrability
• Double-braced leg base for extra stability and safety

The center mount is ideal for location shooting and allows the fixture to spin 360 degrees to produce a wide range of desired angles. For further control, the center mount can also rotate at 90° stops. Pull locking pin and turn counter-clockwise to unlock. When the fixture rotates to a 90° angle, the fixture will "click" into place. Turn locking pin to the right to lock into place.

Manfrotto Steel 3 Section Low Base Wind Up Stand (087NWLB)

Manfrotto Steel 2 Section Low Base Wind Up Stand (083NWLB)

The original Cambo Redwing Light Boom.

Featuring a parallelogram design that makes it easy to precisely raise or lower your light source without changing the angle of light in relation to your subject.

Note: This boom includes 2x counterweight bags.

The SDSTM3 Stand Kit from Dedolight combines three 48.5"-tall DSTM Mini Light Stands with two 15.7"-long DSTFX40 flexible stand extensions.

Ideally suited for travel applications and working on location, this kit also includes a soft bag for carrying and storing all of the kit components.

1 section boom complete with Pivoting Clamp 123, Counter Weight 022, cable clips.

Innovative smooth geared crank handles mean you can glide from one position to the next. Pan, tilt and rotate options are all available by remote control. You'll have complete confidence, even when you need to move quickly. 

• One section boom, max extension 2,7m (8.8')
• Adapts to Manfrotto Junior stands
• Removable adapter with a 3/8'' threaded tip
• Dual cranks provide remote control over fixture pan and tilt
• Aluminum construction with black anodized finish

Replaces #3391, #3091

Broncolor XXL Stand AC (35.114.00)

Stand for reflectors Para FB, lamps and monolights with heavy accessories.

Black anodized aluminum stand with 3 air-cushioned extensions as well as stand rollers. The stand supports consists of a sleeve 28mm (1.1") as well as a bolt 16mm (0.6") with a 3/8" thread.

Manfrotto Black Light Boom 35 w/ stand (085BS)

The largest and heaviest duty boom currently made by MSE

Features and Benefits

• Knurled baby pin ensures whatever is being mounted stays put.
• V-shaped brass brakes ensuring 3-point strong contact.
• Thick threaded collars ensuring a solid bite from t-handles and set screws.
• 12.5kg Counter balance weight

The original Cambo Redwing Light Boom with 7kg Counter Weight.

Featuring a parallelogram design that makes it easy to precisely raise or lower your light source without changing the angle of light in relation to your subject.

Note: This boom includes the filled 7kg counterweight bag.

The SDST4 Four DST Stand Kit from Dedolight contains four of the 7'-tall DST light stands as well as a dedicated soft bag for carrying or storing the four light stands. Each of the stands collapse to a height of 18.9" and weigh just over 2 lb.

The Avenger A4050CS Junior Boom Stand with Leveling Leg is the perfect stand/boom combination for any professional image creator wanting safety and stability over anything else.

This Avenger Junior Boom Stand will be the perfect addition to your studio set up. The 4 Sections, 3 Riser design is great as a standard light stand for general use where height and stablity are paramount. Flick the leaver and the stand instantly turns into one of the best portable booms on the market. The boom arm is perfect for a medium light fixture or large flag or gobo. The built in leveling leg makes this stand usable on uneven terrain making it the perfect choice for studio and location use alike. 

Minimum Height 5'; Maximum Height 16.4'; Closed Length 5.4'; Footprint Diameter 4.4'; Weight 33 lbs.; Maximum Load with the boom closed 66 lbs.; maximum load with the boom extended 17.7 lbs.; Attachment, 5/8" male stud with 1-1/8" female receptor. This Replaces the A700.

An essential 3-pack photo Master Stand that can easily be adjusted to your unique needs.

• Compact 4 section stand with 3 risers supporting up to 9kg
• Slotting parts for easy portability
• Comfortable air cushioning to keep gear safe
• Industry standard spigot and thread for compatibility
• Wide footprint for added stability

Reach even higher with the intuitive Super Stand. This must-have stand is ideal for any photographer looking for total creative flexibility, even in the most challenging environments.

• Heavy-duty camera stand for studio or location shoots
• Stable and secure with double leg bracing
• Comes with handy universal head type, socket and stud
• Includes an innovative levelling leg for rough terrain
• Handles up to 35 kg

Superior Strength. Interchangeable Tips. Infinite uses.

Matthews' Infinity Arm is a versatile cine arm used to mount cameras, lights, monitors and anything else you require.

The Infinity Arm is a fully articulated arm equipped with 360 degrees rotate-able and interchangeable, ball-in-socket, quick release tips for adding and removing accessories quickly and efficiently. The Infinity Arm is the strongest articulating cine arm on the market, with a weight capacity of 15-32lbs (depending on the configuration).

MINIGRIP - A whole new family of smaller mounting devices used for clamping and holding a wide variety of production tools and accessories. When used with Matthews' new ROADRAGS kit, the MINIGRIP system eliminates the need for extra stands. The MINIGRIP kit consists of four lightweight 2" MiniGrip Heads with 3/8" and 5/8" mounting holes, two new Mini-Matthellini Clamps which are half as large as the regular Matthellini but with just as many uses and two 20" arms.

The MINIGRIP kit can be used with camera attachments and other accessories as well as lighting equipment. These miniature tools are ideal for tabletop photography, car interiors, and otherwise confined areas. The high impact composite material used in the manufacturing of these products is very strong, yet extremely light making them ideal for supporting camera accessories. It packs up into its own carrying bag. Patent Pending.

Matthews Studio Equipment is the original “Hollywood” grip supplier to the film and video industries and is well known for its durability and build quality.

Manfrotto Steel Column Stand (231CS)

Chromium plated steel post: diameter: 35mm. Height of light fixture: from ground level to 250cm. Complete with braked wheels. 1 levelling leg.

A stand with attitude!

Boom arms allow you to position your lights to reach the most difficult positions. This junior boom arm can support a payload up to 40kg and extends up to 3m. It also includes a strong steel counterweight for smooth operation and stability.

Manfrotto Follow Spot Stand (070CSU)

Roller stand with folding base.

• Robust
• Load capacity: 25kg

Replaces #A680

The Hollywood Beefy Baby is a popular stand that offers the duty of a heavier stand by combining steel and Ali.. The legs are made of steel instead of aluminum to provide greater stability and longer wear. The top riser which is the smallest in diameter is also made of steel increasing its strength and permitting the 5/8" Baby Pin to be welded directly to the riser instead of being pinned.

Matthews Studio Equipment is the original “Hollywood” grip supplier to the film and video industries they are well known for innovation, durability and build quality

• Chrome plated steel stand
• Grip head and extension arm included
• Sliding leg

Matthews Studio Equipment is pleased to announce the addition of two, new, lightweight aluminum stands to their product range. The recent developments in lighter weight illumination technologies have dictated the development of lighter weight fixtures such as LED arrays, fluorescent fixtures and other luminaries. The two new stands are manufactured from lightweight, hardened aluminum and will prove themselves reliable and robust supports on stage, set or location.

The Hollywood Beefy Baby is a popular stand that offers the duty of a heavier stand by combining steel and aliminium. The legs are made of steel instead of aluminum to provide greater stability and longer wear. The top riser which is the smallest in diameter is also made of steel increasing its strength and permitting the 5/8" Baby Pin to be welded directly to the riser instead of being pinned.

Matthews Studio Equipment is the original “Hollywood” grip supplier to the film and video industries they are well known for innovation, durability and build quality.

Reliable, heavy-duty, and sturdy, this black Steel Heavy Duty Stand is the perfect choice for professional photographers using high-end equipment. Handle your lighting with ease in the studio or on location with this top-quality pick.

• Heavy-duty steel camera stand for indoor and outdoor settings
• Double-braced legs for added stability
• Universal head type with 28mm socket and 16mm stud
• Levelling leg keeps you equipment sturdy on rough terrain
• Lightweight with impressive payload of 25 kg

Manfrotto Black Alu Combi-Boom Stand with Sandbag (420B)

One of the most popular models ever! This stand comes with a detachable Turtle Base, Arm and Grip Head.

Universally seen as the best C-Stand, Grip Head and Arm in the business (due to its superior gripping strength) this product is the first choice for professionals and can be found on film sets all over the world. The T-Handles are ergonomically designed to allow for fast, efficient and safe tightening with little effort. The arm comes with a Hollywood Grip Head attached to one end and an additional Grip Head for positioning.

Matthews are the original “Hollywood” grip suppliers to the film and video industries and are well known for innovation, durability and build quality.

Matthews Digital presents this high-quality lighting stand for the demanding professional. Innovative, robust and durable, the Matthews Digital lighting stands are becoming an integral component of location and studio lighting packages. Additionally, each riser section is spring-dampened, ensuring the stand may be safely lowered. Designed to be stronger and lighter than other manufacturers' more expensive aluminum stands, this is a very robust chrome steel product at a great price.

Matthews Studio Equipment is the original “Hollywood” grip supplier to the film and video industries they are well known for innovation, durability and build quality.

One of the most popular models ever, in black! This stand comes with a detachable Turtle Base, Arm and Grip Head.

Universally seen as the best C-Stand, Grip Head and Arm in the business (due to its superior gripping strength) this product is the first choice for professionals and can be found on film sets all over the world. The T-Handles are ergonomically designed to allow for fast, efficient and safe tightening with little effort. The arm comes with a Hollywood Grip Head attached to one end and an additional Grip Head for positioning.

Matthews are the original “Hollywood” grip suppliers to the film and video industries and are well known for innovation, durability and build quality.

SET IT AND LEAVE IT!

One of the most popular models ever! Comes with standard Sliding Leg and Matthews Grip Head & Arm.

Universally seen as the best C-Stand, Griphead and Arm in the business due to its superior gripping strength, this product is the first choice of professionals and can be found on film sets all over the world.

Black finish.

SET IT AND LEAVE IT!
One of the most popular models ever! Comes with a Turtle Base and Matthews Grip Head & Arm. Available in Black 
Universally seen as the best C-Stand, Griphead  and Arm in the business due to its superior gripping strength, this product is the first choice of professionals and can be found on film sets all over the world .
Matthews Hollywood Arms are made of Stainless Steel and can come in black finish as well. T-Handles are ergonomically designed to allow for fast, efficient, safe tightening with little effort. Comes with our Hollywood Grip Head attached to one end, the strongest Grip Head in the business, and an additional Grip Head for positioning.

Matthews Studio Equipment is the original “Hollywood” grip supplier to the film and video industries they are well known for innovation, durability and build quality  

SET IT AND LEAVE IT!

One of the most popular models ever! Comes with standard Sliding Leg and Matthews Grip Head & Arm.

Universally seen as the best C-Stand, Griphead and Arm in the business due to its superior gripping strength, this product is the first choice of professionals and can be found on film sets all over the world.

Available in Black finish.

Kino Flo Lighting Systems introduced their new KinoGrip Mounts to its Twist-On family of universal mounts at NAB 2017.

SET IT AND LEAVE IT!
One of the most popular models ever! Comes with standard Sliding Leg and Matthews Grip Head & Arm. Available in Black Finish
Universally seen as the best C-Stand, Griphead  and Arm in the business due to its superior gripping strength, this product is the first choice of professionals and can be found on film sets all over the world .
Matthews Hollywood Arms are made of Stainless Steel and can come in black finish as well. T-Handles are ergonomically designed to allow for fast, efficient, safe tightening with little effort. Comes with our Hollywood Grip Head attached to one end, the strongest Grip Head in the business, and an additional Grip Head for positioning.

Matthews Studio Equipment is the original “Hollywood” grip supplier to the film and video industries they are well known for innovation, durability and build quality  

Chrome plated steel stand. 2 sections, 1 riser. 1 levelling leg.

• Professional heavy duty stand for location or studio
• Double braced leg base for extra stability and safety
• Universal head type 14 with 28mm socket with 16mm stud
• Chrome plated steel legs and 1 riser sections
• Provided with one levelling leg for stability on uneven terrain

This Boom-Stick is for the Sun-Bouncer Pro / Big or the Sun-Swatter Pro / Big.

An extendable pole (305cm max) which allows you to hold the Pro or Big frames aloft for reflective/diffusion purposes or to reduce glare and contrast from the sun. Also features a 5/8" attachment for attaching a grip head or small flash head.

NOGA Arm by Matthews – Large is 22" (55.8cm) long at full extension and will support a weight of 11lbs (5kg) at full extension.