Ceiling Tracking

HiGlide Cable Fixing Kit Small Band (Set of 10) (BW-2618) Tool set of 10 bands to attach mains cables to the outside of LiteLift pantographs and Cable Transfer Runners. Features Compatible With Any HiGlide System Heavy Duty Design Made in...

HiGlide 30cm Extension Tube (BW-2615) HiGlide Extension Tubes connect directly to the 5/8th (16mm) spigot on carriages, or can be attached directly below the Lite-Lift Pantographs to create longer drops, so effectively increasing the overall length of the Pantograph by...

HiGlide Safety Cable, Max Load 15kg (BW-2619) A single Safety Cable should be used for all connections on HiGlide system; lights to Pantographs, Pantographs to Carriages, Centre Of Gravity Bars to Pantographs etc. Complete with spring loaded catch gate and closed hoop eye...

HiGlide Adaptor Spigot 5/8 (BW-2609) This 5/8th inch (16mm) Standard Spigot converts the Female end of the HiGlide Extension Tubes or Lite-Lift Pantographs to a Male spigot for attaching lighting fixtures. Features Brass Made in the UK 5/8" Spigot, male...

HiGlide 6 Wheeled Single Carriage (BW-2628)  For heavier items, the HiGlide Six Wheel Carriage ensures smooth operation. This HiGlide 6 wheeled Single Carriage allows our LiteLift Pantograph's to be fixed to your Moveable HiGlide Floating Rails allowing for unrestricted lateral side...

Pair of HiGlide 4.5 Metre Support Rail (BW-2601)  This Pair of HiGlide 4.5 Metre Support Rails are manufactured in the UK from structural grade aluminium ensuring an extremely strong, but lightweight system. Features 4.5 Metre Length (4500mm) Structural Grade Aluminium Compatible With Any...

HiGlide Fixed Rail Clamp With Spigot (BW-2635)   This clamp with spigot is used to attach items to the rail system that will not be required to move. Features Compatible With Any HiGlide System Heavy Duty Design Made in the...

HiGlide Cable Fixing Kit Large Band (Set of 10) (BW-2625) Tool set of 10 'LARGE' bands to attach mains cables to the outside of LiteLift pantographs and Cable Transfer Runners. Features Compatible With Any HiGlide System Heavy Duty Design Made...

HiGlide Cable Transfer Runners (Pack of 5) (BW-2607)  The HiGlide Cable Transfer Runners are supplied in a pack of five with the rubber coupler bands for each Transfer Runner. Typically the installation technician would use two packs of Cable Transfer Runners...

HiGlide 90cm Extension Tube (BW-2617) HiGlide Extension Tubes connect directly to the 5/8th (16mm) spigot on carriages, or can be attached directly below the Lite-Lift Pantographs to create longer drops, so effectively increasing the overall length of the Pantograph by...

HiGlide 3m Lite-Lift Pantograph (BW-2636)  The BW-2636 HiGlide 3 metre Lite-Lift Pantograph is the backbone to our system. UK designed and manufactured. Ideally suited to modern flash lighting, or LED fixtures for photography and video work. The HiGlide Lite-Lift Pantograph extends...

HiGlide 50cm Drop Ceiling Support (BW-2662) The fixed length Drop Ceiling Supports allow the rails to be fixed at the correct height for effective operation. (Recommended 3.7m from the floor). Features Fixed 50cm Length Compatible With Any HiGlide System Heavy...

Pair of HiGlide 3 Metre Support Rail (BW-2600) This Pair of HiGlide 3 Metre Support Rails are manufactured in the UK from structural grade aluminium ensuring an extremely strong, but lightweight system. Features 3 Metre Length (3000mm) Structural Grade Aluminium Compatible With Any...

HiGlide Spring Removal Tool (BW-2614) The HiGlide Spring Removal Tool should always be used when removing, or altering the tension of any HiGlide Constant Force Spring attached to a LiteLift Pantograph. Features Length 21cm Supplied Singly Mild Steel, Powder coated design Compatible With Any HiGlide System...

HiGlide Short Fixing Kit (For Fixing To a Flat Ceiling) (BW-2629) The HiGlide Short Fixing Kit, BW-2629 has been designed to attach HiGlide Rails to flat ceilings, such as timber, or concrete structures. If unsure always consult an expert before carrying out...

HiGlide Centre Of Gravity Bar (BW-2622)  Some large accessories such as softboxes or spotlights may have a different centre of gravity that can distort the Lite-Lift Pantograph. Using the Centre of Gravity Bar restores the centre of gravity to the correct...

HiGlide 6 Wheeled Single Carriage with Brake (BW-2648)  A Braked Version of the standard smooth running 6 Wheeled Single Carriage ensures your lights stay put. The HiGlide Six Wheel Carriage ensures smooth operation and the brake is useful to stop...

Single HiGlide 4.5 Metre Support Rail (BW-2601/1)  This Single HiGlide 4.5 Metre Support Rail is manufactured in the UK from structural grade aluminium ensuring an extremely strong, but lightweight system. Features 4.5 Metre Length (4500mm) Structural Grade Aluminium Compatible With Any HiGlide System Supplied with 4x...

HiGlide 4 Wheeled Single Carriage (BW-2604)  The HiGlide Single Carriage allows our LiteLift Pantograph's to be fixed to your Moveable HiGlide Floating Rails allowing for unrestricted lateral side to side movement. Lightweight for lightweight lighting fixtures. A heavier duty Six...

Single HiGlide 2 Metre Support Rail (BW-2656/1)  This Single HiGlide 2 Metre Support Rail is manufactured in the UK from structural grade aluminium ensuring an extremely strong, but lightweight system. Features 2 Metre Length (2000mm) Structural Grade Aluminium Compatible With Any HiGlide System Supplied with 4x...